• About
  • Interesting shortcuts
  • Programmes and Partnerships
    • Search
    • European Partnerships
    • EU-Programme-Call
  • Projects
    • Projects
  • Resources
    • Resources
  • www.decubber.com
    • Login
  • Programmes and Partnerships
  • EU-Programme-Call
  • Horizon 2020
  • H2020-EU.3. SOCIETAL CHALLENGES
  • H2020-EU.3.4. SOCIETAL CHALLENGES - Smart, Green And Integrated Transport
  • H2020-EU.3.4.5. CLEANSKY2
  • H2020-EU.3.4.5.6. ITD Systems

H2020-EU.3.4.5.6. ITD Systems

Mapped projects (90)
  • H2020-CS2-CFP01-2014-01
    (6)
    • JTI-CS2-2014-CFP01-SYS-02-01 Smart Integrated Wing – Life extended hydrostatic & lubricated systems
      (1)
    • JTI-CS2-2014-CFP01-SYS-02-02 Modular, scalable, multi-function, high power density power controller for electric taxi
      (1)
    • JTI-CS2-2014-CFP01-SYS-02-05 Instrumented bearing for oil cooled starter/generator
      (1)
    • JTI-CS2-2014-CFP01-SYS-02-06 Evaluate mechanical and fatigue capabilities for diode die in harsh environment
      (1)
    • JTI-CS2-2014-CFP01-SYS-02-07 Development of MODELICA libraries for ECS and thermal management architectures
      (1)
    • JTI-CS2-2014-CFP01-SYS-02-08 Embedded sensors technology for air quality measurement
      (1)
  • H2020-CS2-CFP02-2015-01
    (7)
    • JTI-CS2-2015-CFP02-SYS-02-09 ALGeSMo (Advanced Landing Gear Sensing & Monitoring )
      (1)
    • JTI-CS2-2015-CFP02-SYS-02-10 Analysis of centrifugal compressor instabilities occurring with vaneless diffusor, at low mass flow momentum
      (1)
    • JTI-CS2-2015-CFP02-SYS-02-11 Innovative design of acoustic treatment for air conditioning system
      (1)
    • JTI-CS2-2015-CFP02-SYS-02-12 Eco Design : Optimization of SAA chromium free sealing process
      (1)
    • JTI-CS2-2015-CFP02-SYS-03-01 Electromechanical actuator for primary moveable surfaces of small aircraft with health monitoring
      (1)
    • JTI-CS2-2015-CFP02-SYS-03-02 Passive thermo-acoustic insulation for small aircraft.
      (1)
    • JTI-CS2-2015-CFP02-SYS-03-03 Database of dynamic material properties for selected materials commonly used in aircraft industry.
      (1)
  • H2020-CS2-CFP03-2016-01
    (8)
    • JTI-CS2-2016-CFP03-SYS-02-14 Development of electromechanical actuators and electronic control units for flight control systems
      (1)
    • JTI-CS2-2016-CFP03-SYS-02-15 Smart oil pressure sensors for all oil cooled starter/generator
      (1)
    • JTI-CS2-2016-CFP03-SYS-02-16 Optimization two phases cooling solution using micro pump brick
      (1)
    • JTI-CS2-2016-CFP03-SYS-02-18 Eco Design: Injection of thermoplastic reinforced with long fibers (carbon, glass, Kevlar…) for scroll reinforcement
      (1)
    • JTI-CS2-2016-CFP03-SYS-02-19 Eco Design: Composite functionalization: thermal and electrical conductivity
      (1)
    • JTI-CS2-2016-CFP03-SYS-02-21 Model-Based identification and assessment of aircraft electrical and thermal loads architecture management functions
      (1)
    • JTI-CS2-2016-CFP03-SYS-03-04 Low Power De-Icing System suitable for Small Aircrafts
      (1)
    • JTI-CS2-2016-CFP03-SYS-03-05 Eco Design: High efficient non-structural landing gear parts based on advanced carbon fiber material systems and highly automated production technologies for helicopter and aircrafts.
      (1)
  • H2020-CS2-CFP04-2016-02
    (9)
    • JTI-CS2-2016-CFP04-SYS-01-03 Very high brightness & compact full color display for next generation eyes-out cockpit products
      (1)
    • JTI-CS2-2016-CFP04-SYS-02-22 Validation tests of electromechanical actuators and its dedicated control units at TRL 6 level
      (1)
    • JTI-CS2-2016-CFP04-SYS-02-24 Electrical simulation model identification method and tool
      (1)
    • JTI-CS2-2016-CFP04-SYS-02-25 Innovative cooling system for embedded power electronics
      (1)
    • JTI-CS2-2016-CFP04-SYS-02-26 Multivariable control approach for electrical air conditioning pack
      (1)
    • JTI-CS2-2016-CFP04-SYS-02-27 Alternative recirculation filter for better cabin air quality
      (1)
    • JTI-CS2-2016-CFP04-SYS-02-28 Analysis, validation and parametric studies of design and operating parameters for modern cabin ventilation concepts related to future aircraft energy management systems
      (1)
    • JTI-CS2-2016-CFP04-SYS-03-07 An innovative Electrical Power Distribution System (EPDS) for Small Aircraft
      (1)
    • JTI-CS2-2016-CFP04-SYS-03-08 Electromechanical actuation for landing gear
      (1)
  • H2020-CS2-CFP06-2017-01
    (13)
    • JTI-CS2-2017-CFP06-SYS-01-04 Manufacturing process for ultimate performance inertial MEMS Accelerometer
      (1)
    • JTI-CS2-2017-CFP06-SYS-01-05 Solutions for voice interaction towards natural crew assistant
      (1)
    • JTI-CS2-2017-CFP06-SYS-01-06 Affordable Electro-Optical Sensor Cluster/Assembly Unit(LRU) for Vision & Awareness enabling Enhanced Vision, Sense & Avoid, and Obstacle Detection Systems for Aeroplane and Helicopter All-weather Operations and enhanced safety
      (1)
    • JTI-CS2-2017-CFP06-SYS-02-29 High density energy storage module for an electric taxi
      (1)
    • JTI-CS2-2017-CFP06-SYS-02-30 High density energy storage module for an electric taxi
      (1)
    • JTI-CS2-2017-CFP06-SYS-02-31 Innovative pump architecture for cooling electrical machine
      (1)
    • JTI-CS2-2017-CFP06-SYS-02-32 Power module
      (1)
    • JTI-CS2-2017-CFP06-SYS-02-33 Development of functionalizable materials
      (1)
    • JTI-CS2-2017-CFP06-SYS-02-34 Development of autonomous, wireless, smart and low cost current sensor for monitoring of electrical lines
      (1)
    • JTI-CS2-2017-CFP06-SYS-03-09 Computing Node for Safety Critical Applications
      (1)
    • JTI-CS2-2017-CFP06-SYS-03-10 Electrocoating process for Cr6-free surface treatment of aluminium parts
      (1)
    • JTI-CS2-2017-CFP06-SYS-03-11 Screening and development of optimized materials (wires, potting resins and impregnating varnishes) for high temperature coils
      (1)
    • JTI-CS2-2017-CFP06-SYS-03-12 Assessment of Partial Discharge and breakdown behaviour of electric insulation materials for very high voltage gradients
      (1)
  • H2020-CS2-CFP07-2017-02
    (16)
    • JTI-CS2-2017-CfP07-SYS-01-07 Development of a system for pilot eye gaze and gesture tracking in the cockpit environment
      (1)
    • JTI-CS2-2017-CfP07-SYS-01-08 Application of machine learning techniques to enableenhance aircraft performances database and facilitate mission optimization objectives
      (1)
    • JTI-CS2-2017-CfP07-SYS-01-09 Obstruction detection Sensor for Modular surveillance active Trajectory check improvement
      (1)
    • JTI-CS2-2017-CfP07-SYS-01-10 Development of 94 GHz (W-band) Radar Components
      (1)
    • JTI-CS2-2017-CfP07-SYS-02-36 Advanced Load Sensing technology for aerospace applications
      (1)
    • JTI-CS2-2017-CfP07-SYS-02-37 Development of a new backup electronics unit for Smart Inceptor
      (1)
    • JTI-CS2-2017-CfP07-SYS-02-38 Ergonomic impact and new functions induced by Active Inceptor integration in cockpits
      (1)
    • JTI-CS2-2017-CfP07-SYS-02-39 Development of a High Voltage Lithium Battery
      (1)
    • JTI-CS2-2017-CfP07-SYS-02-41 Development of methodology and tools based on advanced statistics applied to Electro Magnetic Compatibility analysis of cable harnesses in aeronautics
      (1)
    • JTI-CS2-2017-CfP07-SYS-02-43 Design and Development of a high temperature HVDC busbar
      (1)
    • JTI-CS2-2017-CfP07-SYS-02-44 Cabin air quality and passenger comfort
      (1)
    • JTI-CS2-2017-CfP07-SYS-02-45 Development of a Foreign Object Debris (FOD) protection device applied to an electrical ECS fresh air inlet.
      (1)
    • JTI-CS2-2017-CfP07-SYS-03-13 Electro-Mechanical Brake actuation for Small Aircraft [SAT]
      (1)
    • JTI-CS2-2017-CfP07-SYS-03-14 Development of Digital Integrated Multifunction Probe for Air Data Sensing [SAT]
      (1)
    • JTI-CS2-2017-CfP07-SYS-03-15 Super hydrophobic and erosion resistant coating for turbine scroll and downstream pipe
      (1)
    • JTI-CS2-2017-CfP07-SYS-03-16 Aircraft mission modelling: ground and flight operations
      (1)
  • H2020-CS2-CFP08-2018-01
    (9)
    • JTI-CS2-2018-CfP08-SYS-02-47 New grip generation for active inceptor
      (1)
    • JTI-CS2-2018-CfP08-SYS-02-48 Design and development of a long stroke Piezo Electric Actuator
      (1)
    • JTI-CS2-2018-CfP08-SYS-02-49 Health Monitoring for Electro-Hydraulic Actuator fluid
      (1)
    • JTI-CS2-2018-CfP08-SYS-02-50 Innovative RTM tooling for CFRP primary structural parts
      (1)
    • JTI-CS2-2018-CfP08-SYS-02-51 Innovative quality inspection methods for CFRP primary structural parts
      (1)
    • JTI-CS2-2018-CfP08-SYS-02-52 Innovative Composite Material Qualification Methodologies
      (1)
    • JTI-CS2-2018-CfP08-SYS-02-53 Development of an optimized DC-DC converter for a smart electrical system
      (1)
    • JTI-CS2-2018-CfP08-SYS-03-17 Improved Thermal Properties of Computing Platforms for Next-Generation Avionics [SAT]
      (1)
    • JTI-CS2-2018-CfP08-SYS-03-18 Development and testing of innovative Cr free anodic layers removal solution
      (1)
  • H2020-CS2-CFP09-2018-02
    (10)
    • JTI-CS2-2018-CfP09-SYS-01-11 Machine learning to detect Cyber intrusion and anomalies
      (1)
    • JTI-CS2-2018-CfP09-SYS-01-12 Software engine for multi-criteria decision support in civil aircraft flight management
      (1)
    • JTI-CS2-2018-CfP09-SYS-01-13 Camera-based smart sensing system for cabin readiness
      (1)
    • JTI-CS2-2018-CfP09-SYS-01-14 Multi-Material Thermoplastic high pressure Nitrogen Tanks for Aircrafts
      (1)
    • JTI-CS2-2018-CfP09-SYS-02-56 Additive Manufacturing Magnetic Motor
      (1)
    • JTI-CS2-2018-CfP09-SYS-02-57 Complex cores for CFRP primary structural products manufactured with high pressure RTM
      (1)
    • JTI-CS2-2018-CfP09-SYS-03-19 Flexible and Automated Manufacturing of wound components for high reliability
      (1)
    • JTI-CS2-2018-CfP09-SYS-03-20 Demonstration and test of low-loss, high reliability, high speed, bearing-relief generators
      (1)
    • JTI-CS2-2018-CfP09-SYS-03-21 Aircraft wing architecture optimal assembly
      (1)
    • JTI-CS2-2018-CfP09-SYS-03-22 Virtual Testing Based Certification
      (1)
  • H2020-CS2-CFP10-2019-01
    (10)
    • JTI-CS2-2019-CfP10-SYS-01-16 Innovative processing for flight practices improvement
      (1)
    • JTI-CS2-2019-CfP10-SYS-01-17 New Efficient production methods for 94 GHz (W-band) waveguide antennas
      (1)
    • JTI-CS2-2019-CfP10-SYS-01-18 Low-profile/drag electronically steerable antennas for In-Flight Connectivity
      (1)
    • JTI-CS2-2019-CfP10-SYS-01-21 Grey Water Container with Reduced Biofilm Growth
      (1)
    • JTI-CS2-2019-CfP10-SYS-02-58 Automatic Haptic System Test Bench for Active Inceptors
      (1)
    • JTI-CS2-2019-CfP10-SYS-02-59 Innovative DC/DC converter for HVDC power sources hybridization
      (1)
    • JTI-CS2-2019-CfP10-SYS-02-60 Toward a Digital Twin ECS and thermal management architecture models : Improvement of MODELICA libraries and usage of Deep Learning technics
      (1)
    • JTI-CS2-2019-CfP10-SYS-02-61 Vapor Cycle System - Heat Exchanger performance 3D modeling with different new low GWP refrigerants
      (1)
    • JTI-CS2-2019-CfP10-SYS-03-23 Electro-Mechanical Landing Gear system integration for Small Aircraft [SAT]
      (1)
    • JTI-CS2-2019-CfP10-SYS-03-24 Power Semiconductor Device module using Silicon Carbide devices for a relatively high-frequency, circa 100kW aircraft motor drive applications
      (1)
  • H2020-IBA-CS2-GAMS-2017
    (1)
    • CS2-GAM-2018-SYS Systems
      (1)
  • H2020-IBA-CS2-GAMS-2019
    (1)
    • CS2-GAM-2020-SYS Systems ITD GAM 2020
      (1)
Powered by Chris Decubber BV